音频输出示例#
音频输出演示了 QAudioOutput 的基本用法。
此示例提供了一个音调生成器，以提供连续的音频播放。第一个按钮允许暂停和恢复播放，第二个按钮允许在操作模式之间切换。
# Copyright (C) 2013 Riverbank Computing Limited.
# Copyright (C) 2022 The Qt Company Ltd.
# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR BSD-3-Clause
"""PySide6 port of the multimedia/audiooutput example from Qt v5.x, originating from PyQt"""
import sys
from math import pi, sin
from struct import pack
from PySide6.QtCore import (QByteArray, QIODevice, Qt, QSysInfo, QTimer,
qWarning, Slot)
from PySide6.QtMultimedia import (QtAudio, QAudioFormat,
QAudioSink, QMediaDevices)
from PySide6.QtWidgets import (QApplication, QComboBox, QHBoxLayout, QLabel,
QMainWindow, QPushButton, QSlider,
QVBoxLayout, QWidget)
class Generator(QIODevice):
def __init__(self, format, durationUs, sampleRate, parent):
super().__init__(parent)
self.m_pos = 0
self.m_buffer = QByteArray()
self.generate_data(format, durationUs, sampleRate)
def start(self):
self.open(QIODevice.ReadOnly)
def stop(self):
self.m_pos = 0
self.close()
def generate_data(self, fmt, durationUs, sampleRate):
pack_format = ''
sample_size = fmt.bytesPerSample() * 8
if sample_size == 8:
if fmt.sampleFormat() == QAudioFormat.UInt8:
scaler = lambda x: ((1.0 + x) / 2 * 255) # noqa: E731
pack_format = 'B'
elif fmt.sampleFormat() == QAudioFormat.Int16:
scaler = lambda x: x * 127 # noqa: E731
pack_format = 'b'
elif sample_size == 16:
little_endian = QSysInfo.ByteOrder == QSysInfo.LittleEndian
if fmt.sampleFormat() == QAudioFormat.UInt8:
scaler = lambda x: (1.0 + x) / 2 * 65535 # noqa: E731
pack_format = '<H' if little_endian else '>H'
elif fmt.sampleFormat() == QAudioFormat.Int16:
scaler = lambda x: x * 32767 # noqa: E731
pack_format = '<h' if little_endian else '>h'
assert pack_format != ''
channel_bytes = fmt.bytesPerSample()
length = (fmt.sampleRate() * fmt.channelCount() * channel_bytes) * durationUs // 100000
self.m_buffer.clear()
sample_index = 0
factor = 2 * pi * sampleRate / fmt.sampleRate()
while length != 0:
x = sin((sample_index % fmt.sampleRate()) * factor)
packed = pack(pack_format, int(scaler(x)))
for _ in range(fmt.channelCount()):
self.m_buffer.append(packed)
length -= channel_bytes
sample_index += 1
def readData(self, maxlen):
data = QByteArray()
total = 0
while maxlen > total:
chunk = min(self.m_buffer.size() - self.m_pos, maxlen - total)
data.append(self.m_buffer.mid(self.m_pos, chunk))
self.m_pos = (self.m_pos + chunk) % self.m_buffer.size()
total += chunk
return data.data()
def writeData(self, data):
return 0
def bytesAvailable(self):
return self.m_buffer.size() + super(Generator, self).bytesAvailable()
class AudioTest(QMainWindow):
PUSH_MODE_LABEL = "Enable push mode"
PULL_MODE_LABEL = "Enable pull mode"
SUSPEND_LABEL = "Suspend playback"
RESUME_LABEL = "Resume playback"
DURATION_SECONDS = 1
TONE_SAMPLE_RATE_HZ = 600
DATA_SAMPLE_RATE_HZ = 44100
def __init__(self, devices):
super().__init__()
self.m_devices = devices
self.m_device = self.m_devices[0]
self.m_output = None
self.initialize_window()
self.initialize_audio()
def initialize_window(self):
central_widget = QWidget()
layout = QVBoxLayout(central_widget)
self.m_deviceBox = QComboBox()
self.m_deviceBox.activated[int].connect(self.device_changed)
for deviceInfo in self.m_devices:
self.m_deviceBox.addItem(deviceInfo.description(), deviceInfo)
layout.addWidget(self.m_deviceBox)
self.m_modeButton = QPushButton()
self.m_modeButton.clicked.connect(self.toggle_mode)
self.m_modeButton.setText(self.PUSH_MODE_LABEL)
layout.addWidget(self.m_modeButton)
self.m_suspendResumeButton = QPushButton(clicked=self.toggle_suspend_resume)
self.m_suspendResumeButton.setText(self.SUSPEND_LABEL)
layout.addWidget(self.m_suspendResumeButton)
volume_box = QHBoxLayout()
volume_label = QLabel("Volume:")
self.m_volumeSlider = QSlider(Qt.Horizontal, minimum=0, maximum=100, singleStep=10)
self.m_volumeSlider.valueChanged.connect(self.volume_changed)
volume_box.addWidget(volume_label)
volume_box.addWidget(self.m_volumeSlider)
layout.addLayout(volume_box)
self.setCentralWidget(central_widget)
def initialize_audio(self):
self.m_pullTimer = QTimer(self)
self.m_pullTimer.timeout.connect(self.pull_timer_expired)
self.m_pullMode = True
self.m_format = QAudioFormat()
self.m_format.setSampleRate(self.DATA_SAMPLE_RATE_HZ)
self.m_format.setChannelCount(1)
self.m_format.setSampleFormat(QAudioFormat.Int16)
info = self.m_devices[0]
if not info.isFormatSupported(self.m_format):
qWarning("Default format not supported - trying to use nearest")
self.m_format = info.nearestFormat(self.m_format)
self.m_generator = Generator(self.m_format, self.DURATION_SECONDS * 1000000,
self.TONE_SAMPLE_RATE_HZ, self)
self.create_audio_output()
def create_audio_output(self):
self.m_audioSink = QAudioSink(self.m_device, self.m_format)
self.m_audioSink.stateChanged.connect(self.handle_state_changed)
self.m_generator.start()
self.m_audioSink.start(self.m_generator)
self.m_volumeSlider.setValue(self.m_audioSink.volume() * 100)
def closeEvent(self, e):
self.stop()
e.accept()
def stop(self):
self.m_pullTimer.stop()
self.m_generator.stop()
self.m_audioSink.stop()
@Slot(int)
def device_changed(self, index):
self.stop()
self.m_device = self.m_deviceBox.itemData(index)
self.create_audio_output()
@Slot(int)
def volume_changed(self, value):
if self.m_audioSink is not None:
self.m_audioSink.setVolume(value / 100.0)
@Slot()
def notified(self):
bytes_free = self.m_audioSink.bytesFree()
elapsed = self.m_audioSink.elapsedUSecs()
processed = self.m_audioSink.processedUSecs()
qWarning(f"bytesFree = {bytes_free}, "
f"elapsedUSecs = {elapsed}, "
f"processedUSecs = {processed}")
@Slot()
def pull_timer_expired(self):
if self.m_audioSink is not None and self.m_audioSink.state() != QtAudio.StoppedState:
bytes_free = self.m_audioSink.bytesFree()
data = self.m_generator.read(bytes_free)
if data:
self.m_output.write(data)
@Slot()
def toggle_mode(self):
self.m_pullTimer.stop()
self.m_audioSink.stop()
if self.m_pullMode:
self.m_modeButton.setText(self.PULL_MODE_LABEL)
self.m_output = self.m_audioSink.start()
self.m_pullMode = False
self.m_pullTimer.start(20)
else:
self.m_modeButton.setText(self.PUSH_MODE_LABEL)
self.m_pullMode = True
self.m_audioSink.start(self.m_generator)
self.m_suspendResumeButton.setText(self.SUSPEND_LABEL)
@Slot()
def toggle_suspend_resume(self):
if self.m_audioSink.state() == QtAudio.State.SuspendedState:
qWarning("status: Suspended, resume()")
self.m_audioSink.resume()
self.m_suspendResumeButton.setText(self.SUSPEND_LABEL)
elif self.m_audioSink.state() == QtAudio.State.ActiveState:
qWarning("status: Active, suspend()")
self.m_audioSink.suspend()
self.m_suspendResumeButton.setText(self.RESUME_LABEL)
elif self.m_audioSink.state() == QtAudio.State.StoppedState:
qWarning("status: Stopped, resume()")
self.m_audioSink.resume()
self.m_suspendResumeButton.setText(self.SUSPEND_LABEL)
elif self.m_audioSink.state() == QtAudio.State.IdleState:
qWarning("status: IdleState")
state_map = {
QtAudio.State.ActiveState: "ActiveState",
QtAudio.State.SuspendedState: "SuspendedState",
QtAudio.State.StoppedState: "StoppedState",
QtAudio.State.IdleState: "IdleState"}
@Slot(QtAudio.State)
def handle_state_changed(self, state):
state = self.state_map.get(state, 'Unknown')
qWarning(f"state = {state}")
if __name__ == '__main__':
app = QApplication(sys.argv)
app.setApplicationName("Audio Output Test")
devices = QMediaDevices.audioOutputs()
if not devices:
print('No audio outputs found.', file=sys.stderr)
sys.exit(-1)
audio = AudioTest(devices)
audio.show()
sys.exit(app.exec())